Coating wire machine replaces traditional painting processes
Release time： 2023-07-23
The coating wire machine has widely replaced traditional painting techniques in this field, but to achieve optimal results, proper installation is essential before use. So, let’s now walk you through the correct installation steps for the coating wire machine:
1. Before installation, ensure that there are two to three operators ready. The machine should be installed in a clean workshop with a level floor. Once the machine is properly positioned, remove all attached components and carefully count and verify them against the machine assembly checklist.
2. Adjust the bolts on the base feet to ensure even and stable force distribution, allowing the machine body to achieve a perfectly level position.
3. Inspect the machine process to check whether it has sustained any dents or damage during transportation.
4. Power Requirements: This machine requires a 380-volt, three-phase, four-wire power supply. The power cable specifications should be larger than 2.5 mm², and the rightmost wire in the incoming power line serves as the neutral conductor. Ensure the machine is properly grounded according to standard procedures before use. After powering on, verify that the motor, heater, lighting, and other components are functioning correctly.
Recommended News
A synthetic fiber doubling and twisting machine is a common type of textile machinery.
2023/07/23
Coating wire machine replaces traditional painting processes
2023/07/23
What is the core function of a sheathing machine?
2025/11/11
Telephone
Address
No. 8, Huaguang 1st Road, High-Tech Park, Xinchang County, Zhejiang Province